We seal leaking foundation cracks and tie-rod holes in Richmond from inside the basement with epoxy, in the poured walls of the subdivisions that filled in around the older downtown. Approximate prices: $500 to $600 for a small crack, $1,500 for a full-height crack and $150 per rod hole, with a heavy discount on more than two. The estimate is free. Contact us for accurate pricing. We have to inspect the job before we can give you a price.
Richmond has an older downtown with older homes and foundations, plus newer houses on poured concrete basements around it. Poured walls leak at shrinkage cracks and tie-rod holes, which epoxy injection seals from inside. Older stone and block need a different fix, and we tell you which one fits each wall.
A small Belle River city at the edge of the farmland
Richmond sits along the Belle River in the northeast corner of Macomb County, where the suburbs give way to open farmland. Homes near the river have wetter ground, and flat clay fields around town hold water against foundations after rain. That steady push is what opens a crack until it leaks.

Approximate prices in Richmond
| Job | Approximate price |
|---|---|
| Small crack (each) | Approximately $500 to $600 |
| Full-height vertical crack, never repaired | Approximately $1,500 per crack |
| Full-height crack that was filled or patched before | Approximately $2,000 per crack |
| Tie-rod (rod) hole | Approximately $150 per hole |
| Horizontal crack, never patched before | Approximately $1,500 per 7 ft of wall |
| Steel I-beam brace for a bowing wall | Approximately $1,500 to $4,000 per brace |
Contact us for accurate pricing. We have to inspect the job before we can give you a price.
Prices are by the job, never by the hour, confirmed at the free estimate.
Poured wall, block wall, or both
Richmond has two kinds of basement. Downtown, the older block and brick basements leak through their joints and along the floor joint as they age, and those get interior drain tile and a sump, not injection. In the subdivisions, newer poured walls leak more at the floor joint and at seams and tie-rod holes, and a leaking crack or rod hole there gets epoxy. Different construction, same driver: water in the clay that cannot drain away pressing against the foundation. Close to the Belle River the water table sits high as well, and it rises further when the river is up after heavy rain.
Why we use epoxy only
Epoxy fills the crack through the full thickness of the wall and cures hard, bonding both sides back together. Structural epoxy is about 10 times stronger than concrete in tensile and bond strength. We seal rod holes and finish the surface with an industrial two-part epoxy paste sold only by the manufacturer, not a hardware-store patch. More on rod hole repair.
How the repair goes
- We look at every wall and confirm what it is made of.
- We clean the crack or rod hole, set ports and inject epoxy from inside.
- We seal the surface with the two-part epoxy paste. No digging outside.
- Most crack and rod hole jobs are done in a few hours.
Bowing block walls
Mid-century block walls in wet ground can start to push in, and the sign is a horizontal or stair-step crack. Sealing that crack alone does not last. A moving wall gets steel I-beam braces, approximately $1,500 to $4,000 each, and a horizontal crack that was never patched runs approximately $1,500 per 7 feet of wall. Contact us for accurate pricing. We have to inspect the job before we can give you a price.
More about basement waterproofing in Richmond, foundation crack repair and rod hole repair. Our 25-year transferable warranty covers our waterproofing work. Nearby: crack repair in Richmond Township and Memphis. Book a free estimate.
Crack and rod hole repairs we have done
- Multiple Foundation Cracks Injected in Washington Township, Leaking and Not Yet Leaking
- Vertical Foundation Crack and 6 Rod Holes Sealed in Rochester Hills, MI
Questions about crack repair in Richmond
How much does foundation crack repair cost in Richmond?
Approximately $500 to $600 for a small crack and approximately $1,500 for a full-height crack, or $2,000 if it was filled or patched before. Rod holes run approximately $150 each, and more than two get a heavy discount. Contact us for accurate pricing. We have to inspect the job before we can give you a price. The estimate is free.
Can you seal a crack in an old stone or block foundation?
Not with injection. Water moves through the joints of stone and block, so sealing one spot only moves the leak. There, interior drain tile and a sump are the lasting fix. Poured walls and poured additions get epoxy injection.
My Richmond subdivision basement has a sump pump. Why is a rod hole still leaking?
A sump handles water at the floor. A rod hole or crack higher up in a poured wall leaks because the flat clay holds rain against the wall rather than letting it drain. That spot is sealed from inside with epoxy.
Water came up the floor drain downtown during a storm. Is that a foundation leak?
No. A sewer backup is possible in the older parts of Richmond when a heavy storm fills the line. If your water came up a floor drain, or it smelled, a backwater valve is the first step. Water that seeps in low along the walls is a separate repair.
Watch recent crack injection jobs
Real jobs filmed by Imad “Matt” Mansour and the crew – no stock footage. Tap a video to play it with sound.
Foundation Crack Repair in Rochester Hills, MI – 38 Rod Holes Packed + Vertical Cracks Sealed
Active Foundation Crack Leak Stopped in 1 Hour – Rochester Hills, MI
Multiple Foundation Cracks Repaired in Washington Township, MI – Leaking & Preventive Injection
Vertical Foundation Crack + 6 Rod Holes Sealed – Rochester Hills, MI
See more job videos on our TikTok · Browse our project gallery
