Black waterproofing membrane covering a foundation wall below red brick, open trench in front

Interior Basement Waterproofing in Madison Heights, MI

Interior basement waterproofing for Madison Heights homes: weep holes in the bottom row of block, drain tile in stone at the footing, a membrane on the wall and a sump pump to carry the water out.

What will it cost?See approximate prices for your basement in about 30 seconds. Free, no phone number needed.

Interior basement waterproofing for Madison Heights homes: weep holes in the bottom row of block, drain tile in stone at the footing, a membrane on the wall and a sump pump to carry the water out.

Why Madison Heights basements leak

Madison Heights became a city in 1955 and filled in fast. About four in ten of its homes were built in the 1950s, nearly three in four went up between 1950 and 1979, and the median house dates to 1961. Many of them sit on concrete block.

Block is hollow. Water collects in the cores of the bottom row and seeps out through the mortar joints and at the floor line. The original clay drain tile outside the footing, where there is any, is often plugged by now, so that water has no other way out.

Sealers and paint on the inside do not hold against that pressure. Read more on why basements leak where the wall meets the floor.

What to check first in a Madison Heights basement

Water finds basements here two ways: through the walls, and up the floor drain. Parts of the city still run on combined sewers, where one pipe carries both sewage and rain. If the water came up the floor drain, the first thing to talk about is a backwater valve, not drain tile.

Not every backup is the city’s sewer, either. A house sewer line from the 1950s or 1960s can be narrowed by roots at the joints or by scale inside old cast iron until it backs up on laundry day, rain or not. A camera inspection tells the two apart.

What goes into the system

We break out a strip of the floor along the leaking walls, lay perforated drain tile in clean stone at the footing, and run it to a sump pump. A dimpled membrane on the wall sends any water coming through the wall down into the drain. Then we pour new concrete over the trench. Most interior jobs take two to four days, depending on how many walls get the drain.

If water runs down the face of the walls, or a finished basement can’t be opened, exterior waterproofing may fit better. We tell you which one at the estimate.

What interior waterproofing costs in Madison Heights

Interior waterproofing is approximately $4,500 to $8,000 for about 40 linear feet of wall, not including the sump. A sump pump system adds approximately $2,500 to $3,000. A large full basement, about 250 linear feet, can run up to approximately $35,000. Contact us for accurate pricing. We have to inspect the job before we can give you a price.

Our waterproofing work carries a 25-year transferable limited warranty. The sump pump and pit are not part of it.

Interior waterproofing jobs we have done

More services in Madison Heights

See everything we do on our Madison Heights basement waterproofing page, or our Oakland County page.

Madison Heights interior waterproofing questions

Why does my Madison Heights block wall leak at the bottom?

Block is hollow, so water collects in the cores of the bottom row and comes out at the floor line. We drill weep holes in that row so the cores drain into new drain tile at the footing.

Water came up my floor drain. Is that a waterproofing problem?

No. That is the sewer. In the combined sewer areas of Madison Heights, heavy rain can push back up a house sewer lead. A backwater valve lets wastewater out and closes when the sewer pushes back.

My street holds water after a storm. Is something broken?

Probably not. In combined sewer areas the city puts restricted covers on street drains to slow storm water into the pipes. If water is still standing 24 hours after the rain, the city asks residents to call its Department of Public Services.

Do I need a sump pump?

Yes. The drain tile carries the water to a sump pit, and the pump sends it outside.

Can it be done in a finished basement?

Usually yes. We take off only what we have to, usually the bottom two feet of drywall along the walls we work on, and leave a clean edge for your drywall person to patch. If you do not want the finished space opened at all, exterior waterproofing is the usual step.

What does the warranty cover?

Our 25-year transferable limited warranty covers the waterproofing work. The sump pump and pit are not included.

Frequently Asked Questions

Why does my Madison Heights block wall leak at the bottom?

Block is hollow, so water collects in the cores of the bottom row and comes out at the floor line. We drill weep holes in that row so the cores drain into new drain tile at the footing.

Water came up my floor drain. Is that a waterproofing problem?

No. That is the sewer. In the combined sewer areas of Madison Heights, heavy rain can push back up a house sewer lead. A backwater valve lets wastewater out and closes when the sewer pushes back.

My street holds water after a storm. Is something broken?

Probably not. In combined sewer areas the city puts restricted covers on street drains to slow storm water into the pipes. If water is still standing 24 hours after the rain, the city asks residents to call its Department of Public Services.

Do I need a sump pump?

Yes. The drain tile carries the water to a sump pit, and the pump sends it outside.

Can it be done in a finished basement?

Usually yes. We take off only what we have to, usually the bottom two feet of drywall along the walls we work on, and leave a clean edge for your drywall person to patch. If you do not want the finished space opened at all, exterior waterproofing is the usual step.

What does the warranty cover?

Our 25-year transferable limited warranty covers the waterproofing work. The sump pump and pit are not included.

Have an invoice from us? Pay it online in under a minute.Card, Apple Pay, Google Pay or Cash App. Deposits, invoices and prepayments.

Pay Your Invoice Now