We repair leaking cracks and tie-rod holes in Roseville basements, with epoxy on poured walls and the right fix for the block walls most houses here have. Approximate prices: $500 to $600 for a small crack, $1,500 for a full-height crack and $150 per rod hole, with a heavy discount on more than two. The estimate is free. Contact us for accurate pricing. We have to inspect the job before we can give you a price.
Nearly all of Roseville went up in the 1950s, and almost all of those houses have concrete block walls on poured footings. That matters: block walls are not injected the way poured walls are. Epoxy injection is for poured walls, additions and garages with leaking cracks or tie-rod holes, and we tell you honestly which fix your walls need.
Block walls on flat lake-plain clay
Roseville sits on flat lake-plain clay that holds water against the walls after every rain. On block, water travels through the hollow cores and mortar joints, so sealing one crack only moves the leak to the next joint. The lasting fix there is interior drain tile and a sump. Where a block wall has started to bow, steel braces hold it. Poured additions and newer walls get epoxy injection.

Approximate prices in Roseville
| Job | Approximate price |
|---|---|
| Small crack (each) | Approximately $500 to $600 |
| Full-height vertical crack, never repaired | Approximately $1,500 per crack |
| Full-height crack that was filled or patched before | Approximately $2,000 per crack |
| Tie-rod (rod) hole | Approximately $150 per hole |
| Horizontal crack, never patched before | Approximately $1,500 per 7 ft of wall |
| Steel I-beam brace for a bowing wall | Approximately $1,500 to $4,000 per brace |
Contact us for accurate pricing. We have to inspect the job before we can give you a price.
Prices are by the job, never by the hour, confirmed at the free estimate.
Poured wall, block wall, or both
Roseville grew from a few thousand people to more than 50,000 in the 1950s, so most basements here are the same age and the same construction: concrete block on poured footings. Injection is for the poured parts of a house, such as an addition, a garage wall or a newer foundation, where a leaking crack or rod hole gets epoxy and the leak stops at that spot. In block, water gets into the hollow cores at or below grade and comes out where the wall meets the footing, and that calls for interior drain tile and a sump. We check each wall and tell you which fix it needs.
Why we use epoxy only
Epoxy fills the crack through the full thickness of the wall and cures hard, bonding both sides back together. Structural epoxy is about 10 times stronger than concrete in tensile and bond strength. We seal rod holes and finish the surface with an industrial two-part epoxy paste sold only by the manufacturer, not a hardware-store patch. More on rod hole repair.
How the repair goes
- We look at every wall and confirm what it is made of.
- We clean the crack or rod hole, set ports and inject epoxy from inside.
- We seal the surface with the two-part epoxy paste. No digging outside.
- Most crack and rod hole jobs are done in a few hours.
Bowing block walls
Mid-century block walls in wet ground can start to push in, and the sign is a horizontal or stair-step crack. Sealing that crack alone does not last. A moving wall gets steel I-beam braces, approximately $1,500 to $4,000 each, and a horizontal crack that was never patched runs approximately $1,500 per 7 feet of wall. Contact us for accurate pricing. We have to inspect the job before we can give you a price.
More about basement waterproofing in Roseville, foundation crack repair and rod hole repair. Our 25-year transferable warranty covers our waterproofing work. Nearby: crack repair in Eastpointe and St. Clair Shores. Book a free estimate.
Crack and rod hole repairs we have done
- Leaking and Preventive Crack Injection in Washington Township, MI
- Foundation Crack Repair in a Michigan Basement (Short Clip)
More services in Roseville
- Interior basement waterproofing in Roseville
- Exterior basement waterproofing in Roseville
- Sump pump installation in Roseville
- French drain and yard drainage in Roseville
See everything we do on our Roseville basement waterproofing page.
Questions about crack repair in Roseville
How much does foundation crack repair cost in Roseville?
Approximately $500 to $600 for a small crack and approximately $1,500 for a full-height crack, or $2,000 if it was filled or patched before. Rod holes run approximately $150 each, and more than two get a heavy discount. Contact us for accurate pricing. We have to inspect the job before we can give you a price. The estimate is free.
Our Roseville basement is block. Can you inject the cracks?
Not the way we inject poured concrete. Water moves through the block cores and joints, so injecting one spot only moves the leak. Interior drain tile and a sump are the lasting fix, and steel braces hold a block wall that has started to bow.
Does my Roseville house have any walls you can inject?
Often, yes. Poured additions, garage walls and newer poured foundations can be injected with epoxy. The original 1950s block walls are a different repair.
Is a crack that runs along my block wall a leak or something worse?
A vertical crack in a poured wall is usually just water. A horizontal crack along a block wall, with the middle bowing in, means the wall is moving, and it needs carbon fiber or steel I-beam bracing, not only sealing.
Watch recent crack injection jobs
Real jobs filmed by Imad “Matt” Mansour and the crew – no stock footage. Tap a video to play it with sound.
Foundation Crack Repair in Rochester Hills, MI – 38 Rod Holes Packed + Vertical Cracks Sealed
Active Foundation Crack Leak Stopped in 1 Hour – Rochester Hills, MI
Multiple Foundation Cracks Repaired in Washington Township, MI – Leaking & Preventive Injection
Vertical Foundation Crack + 6 Rod Holes Sealed – Rochester Hills, MI
See more job videos on our TikTok · Browse our project gallery
