Updated
A backwater valve is a one-way gate on your main sewer line. When the city sewer backs up during a heavy storm, it closes so sewage can’t come up through your basement floor drain. You likely need one if your basement has a floor drain, toilet, shower or laundry below street level, or if sewage has come up before.

What a backwater valve does
Your house drains into a private sewer line that runs to the city main under the street. Most of the time everything flows one way, out. During a big summer storm the city main can fill up and push back toward your house. Water always finds the lowest opening, and in most Michigan homes that’s the basement floor drain.
A backwater valve sits on the main line inside the house, usually in the basement floor near where the line leaves. Normal flow passes right through. When sewage starts moving backward, a gate in the valve closes and holds it out. When the city main drains down, it opens again. Most valves we put in have a clear lid so you can look inside without taking anything apart.
Which homes benefit most
- A basement floor drain, toilet, shower or laundry that sits below street level.
- Older neighborhoods where the sewers back up during big summer storms.
- Any house where sewage has already come up through a floor drain, even once.
- A finished basement, where one backup means tearing out drywall, carpet and framing.
What it won’t fix
- Groundwater. Water coming through the walls, the cove joint or the floor is groundwater, not sewage. That’s a job for drain tile and a sump pump.
- A blocked private line. If roots, a sag or a break in your own line is causing the backup, a valve doesn’t help. The line needs to be repaired.
- Your own drains during a storm. While the valve is closed, water from your sinks and washer can’t leave the house either. Hold off on laundry and long showers until the storm passes.
Why the sewer camera comes first
Before we put a valve in, we want to see the line. A sewer camera inspection shows the depth, the pipe size and the condition of the line, so the valve goes in the right spot. It also tells you whether your backups come from the city main or from a problem in your own pipe. The inspection is approximately $350, with the line locate, a saved video and a written report.
Backwater valve, sump pump and battery backup
These handle two different kinds of water, and many basements around here need both. The backwater valve keeps sewage out. The sump pump keeps groundwater out. A standard sump system runs approximately $2,500–$3,000. Contact us for accurate pricing. We have to inspect the job before we can give you a price. A battery or water-powered backup pump is approximately $1,500, and it keeps the sump running when the power goes out in the same storm that backs up the sewer.
If your basement bathroom sits below the sewer line, its waste may need a sewage ejector to pump it up and out. We sort out which setup your house needs during the free estimate.
What the install involves
- Camera and locate the main line.
- Open the basement floor at the right spot.
- Cut the valve into the line with an access box so it can be checked later.
- Test it, patch the floor, and give you paperwork for your insurance agent.
Some cities require a permit and inspection. We handle that. As the authorized Michigan dealer for Mainline Backflow Products, we install their Top-Check, Fullport and Straight-Fit valves. More on our backwater valve page.
Keeping it working
Have the valve checked once or twice a year so the gate stays clean and closes freely. Grease, wipes and debris are what make a valve stick. Look through the clear lid after a big storm, and keep the access box clear of boxes and storage.
What it costs
A backwater valve installed inside the basement is approximately $3,500 to $6,000, and an exterior install is approximately $6,000 to $8,000, depending on where the line is, how deep it is, where the valve goes and what is around the dig. Contact us for accurate pricing. We have to inspect the job before we can give you a price. The estimate is free. If you’ve already had a backup, read what to do after a sewer backup and our basement flood protection guide.
Frequently Asked Questions
1. Do I need a backwater valve if I already have a sump pump?
Possibly. A sump pump handles groundwater coming through the walls and floor. A backwater valve stops sewage from the city main coming up through your floor drain. They solve different problems, and many Michigan basements need both.
2. How much does a backwater valve cost?
A backwater valve installed inside the basement is approximately $3,500 to $6,000, and an exterior install is approximately $6,000 to $8,000, depending on where the line is, how deep it is, where the valve goes and what is around the dig. A sewer camera inspection first is approximately $350. Contact us for accurate pricing. We have to inspect the job before we can give you a price.
3. How often should a backwater valve be checked?
Once or twice a year. The check makes sure the gate is clean and closes freely, since grease and debris can make it stick.
4. Can I use my drains while the backwater valve is closed?
Not much. While the valve is closed, water from your own sinks, toilets and washer can’t leave the house either. Go easy on water use until the storm passes and the valve reopens.
We’re Mansour’s Innovations, a waterproofing, excavation and plumbing contractor based in Shelby Township, in business since 2014 and serving Macomb and Oakland counties. Book a free estimate.
