We repair leaking basement wall cracks and tie-rod holes in Rochester Hills from inside the basement, injecting epoxy through the full thickness of a poured concrete wall so water has no open path left. Approximate prices are approximately $500 to $600 for a small crack, approximately $1,500 for a full-height crack ($2,000 if someone already filled or patched it), and approximately $150 per tie-rod hole. The estimate is free, and Shelby Township, where we are based, is next door.
Most of Rochester Hills was built in the 1980s and 1990s, and most of those houses have deep poured basements. Poured walls like these leak at shrinkage cracks and at the tie-rod holes left from the forms, and the backfill around them is still settling, which keeps water against the wall.
What a crack means in a Rochester Hills basement
A crack in a poured Rochester Hills wall is usually a shrinkage crack that opened as the concrete cured. It is not a sign the house is failing, but once water finds it, it keeps coming back every wet spring until the crack is filled through the whole wall.
Down near the Clinton River and Paint Creek bottoms the ground stays wetter, and up on the sandy high ground in the northwest the water drains faster but still collects in the settled backfill. Either way, the crack is the path, and sealing it from inside stops the leak without digging.
Approximate prices for basement crack repair in Rochester Hills
| Job | Approximate price |
|---|---|
| Small crack (each) | Approximately $500 to $600 |
| Full-height vertical crack, never repaired | Approximately $1,500 per crack |
| Full-height crack that was filled or patched before | Approximately $2,000 per crack |
| Tie-rod (rod) hole | Approximately $150 per hole |
| Horizontal crack, never patched before | Approximately $1,500 per 7 ft of wall |
| Carbon fiber strips for a slight bow | Approximately $1,500 to $2,500 |
| Steel I-beam brace for a bowing wall | Approximately $1,500 per brace |
These are approximate prices by the job, never by the hour, and we confirm the number at the free estimate after we see the wall. More than two cracks or tie-rod holes on one job gets a discount.
Rod hole leaks in Rochester Hills
Rod holes are the most common leak we fix in Rochester Hills. On one job here we packed 38 rod holes and sealed the vertical cracks in the same foundation, and on another we stopped a leaking crack other contractors had not been able to fix, in about an hour.
How the repair goes
- We look at the wall first and confirm whether it is poured concrete or block, because that decides the repair.
- On a poured wall we clean the crack or rod hole, set injection ports and inject epoxy from inside until it fills the full thickness of the wall.
- The epoxy cures hard and bonds both sides of the crack back together. There is no digging and no yard damage.
- Most crack and rod hole jobs are done in a few hours, and you see the finished wall before we leave.
A leaking crack or a moving wall?
Most vertical cracks in poured walls are shrinkage cracks and are water problems only. A horizontal crack, a stair-step crack in block, or a wall that bows in is a structural problem, and that calls for foundation repair with steel I-beam braces or carbon fiber, not just a sealed crack. If water is coming in along the floor instead of through the wall, interior drain tile is the usual fix.
Recent jobs near Rochester Hills
- 38 rod holes packed and vertical cracks sealed in a Rochester Hills foundation
- A leaking crack other contractors could not stop, fixed in about an hour
- One vertical crack and 34 rod holes sealed with epoxy in Bloomfield Hills
More about basement waterproofing in Rochester Hills, foundation crack repair and rod hole repair. Nearby: Rochester, basement crack repair in Troy, basement crack repair in Shelby Township. Book a free estimate.
Questions about crack repair in Rochester Hills
How much does it cost to fix a leaking basement crack in Rochester Hills?
Approximately $500 to $600 for a small crack and approximately $1,500 for a full-height crack, or $2,000 if it was filled or patched before. Tie-rod holes run approximately $150 each. More than two cracks or holes on one job gets a discount, and the estimate is free.
What do you fill basement wall cracks with?
Epoxy, on every crack we inject. It fills the crack through the full thickness of the wall and cures hard, bonding the two sides back together, so the clay outside has no open gap to push water through.
Our older Rochester Hills house has a crack in a block wall. Can you inject it?
Not the way we inject poured concrete. Block is hollow, so injected material just fills the cores. On a block wall, water coming in at the floor is usually handled with interior drain tile, and a stair-step or horizontal crack in a wall that is moving gets braces.
What are the little round spots leaking on my poured wall?
Tie-rod holes. When a poured wall is formed, steel ties hold the forms together, and the snapped-off ends left in the wall can rust and leak. We seal each one from inside for approximately $150, less when there are several.
Is a crack in my basement wall a structural problem?
Usually not. Most vertical cracks in poured walls are shrinkage cracks. A horizontal crack, a crack wider than a pencil lead, or one where one side sticks out past the other is worth having us look at soon.
Watch recent crack injection jobs
Real jobs filmed by Imad “Matt” Mansour and the crew – no stock footage. Tap a video to play it with sound.
Foundation Crack Repair in Rochester Hills, MI – 38 Rod Holes Packed + Vertical Cracks Sealed
Active Foundation Crack Leak Stopped in 1 Hour – Rochester Hills, MI
Multiple Foundation Cracks Repaired in Washington Township, MI – Leaking & Preventive Injection
Vertical Foundation Crack + 6 Rod Holes Sealed – Rochester Hills, MI
See more job videos on our TikTok · Browse our project gallery

