Black waterproofing membrane covering a foundation wall below red brick, open trench in front

Egress Window Installation in Rochester Hills, MI

Rochester Hills homes from the 1970s through the 2000s often have big basements that owners want to finish with a bedroom or office.

What will it cost?See approximate prices for your basement in about 30 seconds. Free, no phone number needed.

Rochester Hills homes from the 1970s through the 2000s often have big basements that owners want to finish with a bedroom or office. Most have poured concrete walls, which cut cleanly for an egress opening. On sloped lots, some walls are partly above grade, which can make the well shallower and the job simpler.

Poured walls and sloped lots

We saw-cut poured walls with a wet saw, so the opening is clean and square. We choose the wall that works out on depth, access and drainage, and avoid walls under decks or patios where we can.

Deep basements and decks in Rochester Hills

The 1980s and 1990s colonials here have deep basements, and a deep well needs a way to climb out: the well gets a ladder or steps when it is deeper than 44 inches. Many lots are hilly with decks and walkouts, so access matters as much as depth when we pick the wall.

How an egress window goes in

  • We dig the well area outside, down below the new sill.
  • The opening is saw-cut through the foundation wall, and the wall is reinforced around it where needed.
  • A new egress window is set, sealed and trimmed.
  • A window well goes in outside, with a drain at the bottom tied into the footing drain or a stone sump so it doesn’t fill with water.
  • We backfill, grade, and add a well cover if you want one.

A basement bedroom needs an egress window large enough to climb out of, with a sill low enough to reach. Most cities require a building permit for the work, and we’ll tell you what yours requires.

If the trouble is an old well that holds water, start with window well drains.

What an egress window costs in Rochester Hills

An egress window runs approximately $4,500 to $6,500, depending on the wall, the depth and the well.

Contact us for accurate pricing. We have to inspect the job before we can give you a price.

Outside Rochester Hills? See egress window installation in Oakland County.

More services in Rochester Hills

See everything we do on our Rochester Hills basement waterproofing page.

Questions about egress windows in Rochester Hills

Which wall should get the egress window?

Usually the one that’s shallowest, easiest to reach from outside, and away from decks and patios. We’ll show you the options.

Can you cut a poured wall without cracking it?

Yes. We saw-cut the opening and reinforce around it where needed.

Will we need a window well?

On most walls, yes. On walkout walls partly above grade, the well may be shallow or not needed.

How long does it take to cut in an egress window in Rochester Hills?

Most egress window jobs take one to two days. That depends on the wall, how deep the dig is and what is outside the wall. You get a schedule with the free estimate.

Call 586-345-7292, 8 AM to 8 PM, 7 days a week, or book a free estimate. More on our egress windows page and our Rochester Hills page.

Recent Rochester Hills jobs on video

Real jobs filmed by Imad “Matt” Mansour and the crew – no stock footage. Tap a video to play it with sound.

Interior Waterproofing + Sump Pump Repair in Rochester Hills, MI – 30 ft Drain System

Foundation Crack Repair in Rochester Hills, MI – 38 Rod Holes Packed + Vertical Cracks Sealed

Active Foundation Crack Leak Stopped in 1 Hour – Rochester Hills, MI

See more job videos on our TikTok · Browse our project gallery

Frequently Asked Questions

Which wall should get the egress window?

Usually the one that's shallowest, easiest to reach from outside, and away from decks and patios. We'll show you the options.

Can you cut a poured wall without cracking it?

Yes. We saw-cut the opening and reinforce around it where needed.

Will we need a window well?

On most walls, yes. On walkout walls partly above grade, the well may be shallow or not needed.

How long does it take to cut in an egress window in Rochester Hills?

Most egress window jobs take one to two days. That depends on the wall, how deep the dig is and what is outside the wall. You get a schedule with the free estimate.

Have an invoice from us? Pay it online in under a minute.Card, Apple Pay, Google Pay or Cash App. Deposits, invoices and prepayments.

Pay Your Invoice Now