Carbon fiber reinforcement stops a basement wall that has only started to bow from moving any further. We bond carbon fiber strips to the inside of the wall with epoxy, for homes across Macomb and Oakland County. There is no digging, and the strips sit nearly flat against the wall.
When carbon fiber is the right fix
- The wall has a slight bow, usually under about 2 inches of movement
- The bow has mostly stopped moving
- The wall is poured concrete, or block with a mild bow
A wall that has bowed more, is still moving, or has a long horizontal crack with stair-step cracking needs steel I-beam braces instead. We measure the wall at the free estimate and tell you straight which one it needs.
How carbon fiber reinforcement works
Strips of carbon fiber fabric run up the inside face of the wall, from the bottom to the top, spaced along its length. Each strip is bonded to the wall with epoxy and anchored at the top and bottom. Once the epoxy has bonded, the strips keep the wall from moving further. They do not push it back.
The crack that came with the bow gets filled as part of the same job. Our foundation crack injection page shows how we fill cracks with epoxy.
Carbon fiber or steel braces
- Carbon fiber: for a slight bow. Nearly flat, can be painted, no digging
- Steel I-beam braces: for more bow, horizontal cracks and stair-step cracks in block walls. The beams stand a few inches out from the wall
Our guide, Carbon Fiber Straps vs. Steel I-Beam Braces, compares the two side by side.
Why the wall started to bow
Most of Macomb and Oakland County sits on heavy clay. Clay holds water, swells when it is wet and freezes in winter, and it pushes sideways on the foundation. Carbon fiber holds the wall. It does not keep that clay dry, so at every estimate we also look at the gutters, downspouts and grading. Downspouts carried well away from the house and soil graded away from the foundation keep the pressure down. See exterior drainage.
Permit and prep
Reinforcing a basement wall is structural work, and under Michigan’s residential code it generally needs a building permit. Your city or township building department decides, and we can pull the permit for you. Before we start, anything stored along the wall gets moved. In a finished basement, the drywall comes off where the strips go.
What carbon fiber reinforcement costs
Carbon fiber wall reinforcement is approximately $1,500 to $2,500. Contact us for accurate pricing. We have to inspect the job before we can give you a price.
The price depends on the length of the wall and how many strips it needs. We price by the job, never by the hour, and the estimate is free. All of our foundation prices are on the foundation repair cost in Michigan page.
Warranty
Carbon fiber reinforcement is not covered by our 25-year transferable limited warranty, which covers waterproofing work only. It carries the warranty written on your contract or invoice, plus any manufacturer’s warranty.
More on bowing walls
- Foundation repair for bowing basement walls
- Bowing basement walls and horizontal cracks: causes and repair options
Carbon fiber wall repair near you
- Foundation repair in Macomb County
- Foundation repair in Oakland County
- Foundation repair in Rochester Hills
- Foundation repair in Macomb Township
- Foundation repair in Utica
- Foundation repair in Rochester
- Foundation repair in Bloomfield Hills
- Foundation repair in West Bloomfield Township
Want the wall measured? Call (586) 345-7292 between 8 AM and 8 PM, any day of the week, or book a free estimate.
Carbon fiber wall reinforcement questions
Does carbon fiber straighten a bowed wall?
No. The strips keep the wall from moving further. They do not push it back.
How much bow can carbon fiber hold?
It is for a slight bow, usually under about 2 inches of movement, that has mostly stopped. A wall that has moved more needs steel I-beam braces.
Does carbon fiber work on block walls?
Yes, on a block wall with a mild bow, and on poured concrete walls. Block walls with more bow, horizontal cracks and stair-step cracks need steel braces.
Can carbon fiber strips be painted?
Yes. The strips sit nearly flat against the wall and can be painted, so they take up almost no room.
Do I need a permit for carbon fiber reinforcement?
Usually, yes. Reinforcing a basement wall is structural work, and under Michigan’s residential code it generally needs a building permit. Your building department decides, and we can pull the permit for you.
What does carbon fiber wall reinforcement cost?
It is approximately $1,500 to $2,500. Contact us for accurate pricing. We have to inspect the job before we can give you a price.
