Updated
For a basement wall that is starting to bow, carbon fiber straps are approximately $1,500 to $2,500 and steel I-beam wall braces are approximately $1,500 to $4,000 per brace. Carbon fiber suits a poured or block wall with a slight bow that hasn’t moved far. Steel braces suit block walls that have bowed more, because they can be tightened over time to keep the wall from moving further. Contact us for accurate pricing. We have to inspect the job before we can give you a price.
Carbon fiber vs. steel I-beam braces at a glance
| Carbon fiber straps | Steel I-beam braces | |
|---|---|---|
| Where it fits | Slight bow, usually under about 2 inches of movement | Block walls with more bow, horizontal cracks and stair-step cracks |
| How it works | Straps epoxied to the wall hold it in place | Steel beams anchored to the floor and the joists above hold the wall |
| Space in the basement | Almost none; can be painted or finished over | Beams stand a few inches off the wall |
| Can it be adjusted later? | No | Yes, braces can be tightened |
| Approximate price | $1,500 to $2,500 | $1,500 to $4,000 per brace |
Contact us for accurate pricing. We have to inspect the job before we can give you a price.
A heavy discount applies when a wall needs several braces. Prices are by the job, never by the hour.
Why basement walls bow in Macomb and Oakland County
Most of the area sits on heavy clay. Clay holds water, swells when it is wet and freezes in winter, and it pushes sideways on the foundation. Block walls take it the worst: the push shows up as a horizontal crack partway up the wall, stair-step cracks in the mortar, and a wall that leans in at the middle. Poured walls bow less often, but they can crack and move too.
When carbon fiber is the right call
- The wall has moved only slightly and the movement has stopped or slowed
- You want to finish the basement and need the wall flat against the framing
- The wall is poured concrete, or block with a mild bow
When steel braces are the right call
- A block wall has bowed more than carbon fiber can hold
- The wall is still moving and you want a fix that can be tightened over time
- There is a long horizontal crack or stair-step cracking across much of the wall
If a wall has moved too far to be braced, it may need to be dug out and rebuilt. We don’t do wall rebuilds, piering or underpinning, and we’ll tell you at the estimate if your wall is past bracing.
Take the pressure off the wall too
Bracing holds the wall. Getting water away from it keeps the pressure down: downspouts carried well away from the house, soil graded away from the foundation, and drainage where water collects. See exterior drainage. Note that our 25-year transferable warranty covers waterproofing work; it does not cover carbon fiber or beams.
Read more about bowing walls and horizontal cracks, or see our foundation repair page.
Ready to have a wall measured? See our service pages for carbon fiber wall reinforcement and steel I-beam wall braces.
Frequently Asked Questions
1. How much do carbon fiber straps cost for a bowing basement wall?
Approximately $1,500 to $2,500 with Mansour’s Innovations. Contact us for accurate pricing. We have to inspect the job before we can give you a price.
2. How much do steel I-beam braces cost?
Approximately $1,500 to $4,000 per brace, with a heavy discount when several braces are needed. Contact us for accurate pricing. We have to inspect the job before we can give you a price.
3. Is carbon fiber or steel better for a bowing wall?
Carbon fiber is for a slight bow that has mostly stopped moving. Steel braces handle more bow and can be tightened over time. Which one fits depends on how far the wall has moved, and we measure that at the estimate.
4. Can a bowing wall be pushed back straight?
Braces can hold a wall and be tightened over time, but a badly bowed wall usually isn’t pushed fully straight. If it has moved too far to brace, it may need rebuilding, which we don’t do.
5. Does your warranty cover wall braces?
No. Our 25-year transferable warranty covers waterproofing work only; it does not cover carbon fiber or beams.
